Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSzabo, I-
dc.contributor.authorSun, J-
dc.contributor.authorFeng, G-
dc.contributor.authorKanfoud, J-
dc.contributor.authorGan, TH-
dc.contributor.authorSelcuk, C-
dc.identifier.citationApplied Sciences (Switzerland), 7 (11), (2017)en_US
dc.description.abstractIn this paper, a state of the art automated defect recognition (ADR) system is presented that was developed specifically for Non-Destructive Testing (NDT) of powder metallurgy (PM) parts using three dimensional X-ray Computed Tomography (CT) imaging, towards enabling online quality assurance and enhanced integrity confidence. PM parts exhibit typical defects such as microscopic cracks, porosity, and voids, internal to components that without an effective detection system, limit the growth of industrial applications. Compared to typical testing methods (e.g., destructive such as metallography that is based on sampling, cutting, and polishing of parts), CT provides full coverage of defect detection. This paper establishes the importance and advantages of an automated NDT system for the PM industry applications with particular emphasis on image processing procedures for defect recognition. Moreover, the article describes how to establish a reference library based on real 3D X-ray CT images of net-shape parts. The paper follows the development of the ADR system from processing 2D image slices of a measured 3D X-ray image to processing the complete 3D X-ray image as a whole. The introduced technique is successfully integrated into an automated in-line quality control system highly sought by major industry sectors in Oil and Gas, Automotive, and Aerospace.en_US
dc.subjectNon-Destructive Testingen_US
dc.subjectComputed tomographyen_US
dc.subjectAutomated defect recognitionen_US
dc.subjectQuality assuranceen_US
dc.subjectQuality controlen_US
dc.subjectPowder metallurgyen_US
dc.subjectAdditive manufacturingen_US
dc.subjectNet-shape manufacturingen_US
dc.titleAutomated defect recognition as a critical element of a three dimensional X-ray computed tomography imaging-based smart non-destructive testing technique in additive manufacturing of near net-shape partsen_US
dc.relation.isPartOfApplied Sciences (Switzerland)-
Appears in Collections:Dept of Mechanical Aerospace and Civil Engineering Research Papers

Files in This Item:
File Description SizeFormat 
Fulltext.pdf6.55 MBAdobe PDFView/Open

Items in BURA are protected by copyright, with all rights reserved, unless otherwise indicated.